How to Reset the Filter Indicator Light on Your American Style Sideboard Refrigerator

One of the most important things when it comes to a side-by-side refrigerator is to change the water filter cartridge regularly. After changing the refrigerator water filter, you should reset the filter indicator light on the refrigerator display to monitor when it is time to change the refrigerator filter again.

Unfortunately, you have probably already lost your manual. Don’t worry, she keeps reading.

Each side-by-side refrigerator manufacturer provides their own instructions for resetting the indicator light. So here the list of 30+ fridge manufacturers on how to reset the light after replacing the fridge water filters:

Amana: Press and hold the lock and auto light (or water) buttons on the dispenser (at the same time) for 4 seconds until the filter status indicator starts flashing, then release the buttons.

LG/Atag/Fagor/Liebherr: press and hold the Light/Filter button for 3 seconds.

Bauknecht: press and hold the Filter Reset button for 3 seconds until the light turns green.

Baumatic: press the ice maker lock button for 3 seconds or more. The LED will then change to NORMAL.

Beko/Teak: press and hold the Auto Eco button for 5 seconds.

Bosch/Siemens/Neff/Balay/Miele: press and hold the water filter reset button for 5 seconds. Newer models: press the Options button until “change filter” is selected, press the +/- selection buttons until the “change filter” screen turns off.

Layer: press the reset button until the light turns green.

Daewoo / Nardi / Pelgrim / Steel: press the ice maker lock button for 3 seconds or more; while holding down the lock button, the light will turn green.

From Dietrich: press and hold the Reset Filter button for 5 seconds.

Gaggenau: press and hold the Filter Reset button for 3 seconds until the yellow/red light turns off.

GE: press and hold the Water Filter Reset button on the dispenser for 3 seconds.

Haier: press the Reset button.

Kitchen assistant: press and hold the filter reset button for 3 seconds until the Order or Replace light turns off.

Maytag: Press Options, then Water Filter, then Reset, then Yes. The status light will change from red to green when the system is reset. Or press and hold the Filter Reset button for 3 seconds.

Samsung: press the Ice Type and Child Lock (or Humidity Control) buttons simultaneously for 3 seconds. Note: Please press and hold the buttons for only 3 seconds. If you press these 2 buttons simultaneously for 5 seconds, the reset function stops. Release the buttons and repeat the same step one more time. The indicator light on the water filter should turn green.

Smeg: press and hold the OK button until all three dashes reappear on the screen. Or press and hold the Water Filter Reset button for 5 seconds.

Below zero: press and hold the Filter Reset control for 5 seconds.

Whirlpool/Hotpoint-Ariston/Kppersbusch: press the Filter Reset button until the icon turns blue (or green). The Reset Filter button will not work if the filter icon is already blue (or green). Or press the light switch 5 times in 10 seconds.

Leave a Reply

Your email address will not be published. Required fields are marked *