Power Powder Vanish Carpet
The Power Powder Vanish Carpet Oximeter is a revolutionary portable device that provides a clean, safe environment for those who perform oral health exams. This product has been recommended as an aid to those who have to do a health check before performing work or who are concerned about developing lung cancer or other cancers. However, some say the product does more than that.
The powder is used in conjunction with a hand-held computerized device that measures vital signs such as pulse rate and blood oxygen saturation. While there is no actual scanning of the body or a diagnostic test performed by the computer, the Power Powder Vanish uses its patented Contrast Display System (CDS) to measure the patient’s oxygenated blood gases. These are then compared to normal reference values and various factors are determined such as smoking, factors that increase the risk of cancer, and so on. If the reading of the oxygen saturation is above normal or low, then it indicates a possible health problem. If this is the case, then a patient will be advised to cease smoking, to get regular checkups with their doctor and maybe start using the Power Powder Vanish.
The product was designed by Dr. George C. Capra, one of the world’s leading experts on the causes of cancer. He came up with the idea when he developed a technique for measuring the amount of oxygen that would enter into the lungs if a patient was to lie down flat on his or her back, without a supportable object. Dr. Capra developed the first ever computerized internal rate monitor that uses a combination of light emitting diodes (LED’s) and a hand held computer for the purpose of measuring the light waves passing through the body. The results are displayed on a monitor screen and are then interpreted by the use of the patented Contrast Display System(CDS).
Power Powder Vanish Carpet Oximeter – What Is It?
The system has been successfully used in hospitals, nursing homes, laboratories and other medical facilities around the country. However, it has been primarily marketed as a home-use product and is available from local retailers. It is sold with a display screen that is sensitive to changes in light wave frequencies. It is also available in an audio version. In addition to the light source, the product includes a low battery charger and carrying case.
It works by emitting a series of infrared pulses at a frequency that is undetectable by the human eye. The pulse duration is only a fraction of a second, but each pulse can cover a wide area. This allows the product to work for a much longer period than its competitors. Because the product works by emitting light, it also utilizes the most common method for detecting blood oxygen saturation – determining your “oxygen saturation” using a pulse oximeter.
To use the product, you need to place it next to your bed or wherever you will be obtaining good readings. You should place the sensor face up in order to detect a large area. The powder will produce the infrared pulses and the computer monitors the data. You should hold the sensor close to the area you are testing, either with the device on your arm or the sensor itself held in your hand. The product has a button on the front called the “test button”. When this button is pressed, the sensor will start measuring and transmitting the information to your computer.
